1/4 inch x 1 1/2 inch Zinc Hammer Drive Anchors Qty (1)

1/4 inch x 1 1/2 inch Zinc Hammer Drive anchors can be used in concrete, brick, and stone.

• Easy to install.
• Tamper proof.
• Zinc coating.
• Mushroom Head style.

1. Drill hole in masonry or concrete through mounting holes in fixture same diameter as anchor to be used. In wood and other soft material to be fastened, drill through fixture and directly into masonry. (Drill hole 1/4 inch deeper than the calculated embedment depth.)

2. Insert anchor assembly through mounting holes in fixture and into anchor hole.

3. Tap gently until head of anchor body is set tightly against item to be fastened.

4. Gently hammer pin flush to expand body. Do not over drive pin into body as this could damage the anchor.